The application of gas springs in the industrial field

For controlled lifting operations of covers, hoods, and valves, using industrial gas springs is a good choice. ACE company can provide various models of this stainless steel damping element. This stainless steel gas spring is mainly suitable for special requirements in the food industry, medical technology, shipbuilding, or environmental technology.  
Stainless steel industrial gas springs made of various V2A or V4A alloy materials have not only been approved for use in the food industry, but also meet requirements such as the hygiene standards of the Robert Koch Institute in Germany. This stainless steel gas spring is suitable for special industries such as the food industry, medical technology, shipbuilding, or environmental technology. In addition, ACE's stainless steel gas springs can also be used in medical devices, hospital beds, and operating tables, which not only require cleanliness but also non-magnetic properties.
ACE company can provide standard gas springs with valves and a shell diameter of 8-70mm and an elastic force of 10-5000N. The shell diameter of the stainless steel damping element is 15~40mm, which can have different stroke lengths and different top out forces. In order to obtain permission for application in the food industry and environmental technology industry, stainless steel gas springs were filled with a special oil for light and gentle end position vibration reduction.  
Nitrogen gas spring that does not require maintenance
The working principle of all models of gas springs is the same, which is a maintenance free, self sealing system filled with pressurized nitrogen gas. The nitrogen gas flows out through the throttle hole on the piston when the lid is closed. This can provide a determined piston entry speed and ensure braking.
When the piston is moved out, the oil filled at the terminal position may cause a soft landing. Due to this reason, the terminal damping only works when the gas spring is installed downward on the piston rod. During system startup, nitrogen is refluxed and manual operation is supported. According to ACE company, compared with other vibration reduction methods, this vibration reduction scheme has particularly good adjustability mainly manifested in the possibility of filling the gas springs with nitrogen gas separately. ACE company explains that nitrogen filling can be carried out by users on-site or during production as needed.  
ACE company mainly uses V4A stainless steel for the manufacturing of gas springs used in the shipbuilding industry for raising cabin doors or releasing lifeboats. Unlike V2A alloy, V4A with higher molybdenum content is a stainless steel that is corrosion-resistant and resistant to seawater erosion. In terms of durability against external environmental influences, all models of stainless steel gas springs from ACE company have also demonstrated their excellent performance, winning the trust of many users over the years. Its designed service life is 100000 trips, which is equivalent to twice the requirements of the automotive manufacturing industry.  
Users can install gas springs in the machine and device themselves by using the corresponding accessories. ACE company can provide models made of stainless steel for all connecting components, including piston rods, guide bearings, housings, and base plates.